| This page covers things like the adjustable cam gear
sets These steel gear and chain sets just save so much time, and make such an accurate job of
timing your cam they are recommended for fitting to all engines, irrespective of if it is
a stock rebuild or full race engine. Cam lube should always be applied to cam and
lifters during assembly. The APT 1950cc dyno engine picked up 12 HP almost throughout the complete RPM range (3000 to 7000 on test) with a VP12 cam when changing over to the 1.625 ratio roller rockers. Peak HP was 125, using a 32/36 progressive downdraft Weber. |
Adjustable Cam Gear Set
| Part Number | Description |
Pkg'd | Price US $ |
Kent Adjustable Steel Cam Gear & Chain Set |
EA |
$228.00 | |
Kent Adjustable Cam Gear & Chain Set, High Velocity |
EA |
$249.50 | |
| Lightweight Adjustable Steel Cam Gear & Chain Set | EA | $119.00 |
Followers, Keepers, Lube & Misc
| Part Number | Description |
Pkg'd | Price US $ |
Keepers For MGB 1968 -> ("Bulloc" 1/2 round type) |
EA |
$3.30 |
|
Crane Camshaft Assembly Lube (For valve stems also) |
EA |
$11.32 |
|
Crane Engine Break-In Lube (use once for first engine run). |
EA |
$10.59 |
|
Cam Followers/Lifters, short, MGA & MGB |
EA |
$5.48 |
|
CF01-N........ |
Cam Followers/Lifters, short, MGA & MGB-Nitrided |
EA |
$7.48 |
| CF02 | Cam followers/Lifters, short, MGA & MGB chilled iron | ST | $149.00 |
Timing Chain Tensioner For MGB |
EA |
$14.98 |
|
Rocker Adjuster Screw - 5/16 (Later 'A' & 'B' series) |
EA |
$2.25 |
|
Rocker Adjuster Lock Nut - 5/16 (for #RAS-2) |
EA |
$0.59 |
|
RSLS........ |
Rocker Shaft Locating Screw |
EA |
$2.65 |
Roller Rocker Components
| Part Number | Description |
Pkg'd | Price US $ |
TITAN Roller Rocker Standard (In-line) Oil Feed Pillar |
EA |
$46.28 |
|
TITAN Roller Rocker Off Set Oil Feed Pillar For HLR-5 |
EA |
$49.71 |
|
RRB1625..... |
TITAN Roller Rocker Arm For HLR-5 |
EA |
$59.99 |
Rocker Adjuster Screw & Nut for Titan Roller Rockers |
EA |
$5.89 |
|
| RRSHAFT-B | Rocker Shaft For Titan Roller Rockers | EA |
$73.70 |
Rocker Shafts
| Part Number | Description |
Pkg'd | Price US $ |
Rocker Shaft, Standard |
EA |
$29.95 |
|
Rocker Shaft, Gas Nitrided |
EA |
$51.99 |
|
| RRSHAFT-B | Rocker Shaft For Titan Roller Rockers | EA |
$73.70 |
Valve Springs
| Part Number | Description |
Pkg'd | Price US $ |
VSP-05 |
Dual Valve Spring Set FOR MGB, Standard Road Use |
ST |
$54.95 |
S4562....... |
Dual Valve Springs For MGB, Mild Road Use, ISKY | ST |
$76.91 |
Dual Valve Springs For MGB, Performance & Race, ISKY |
ST |
$89.98 |
|
Dual Valve Springs (use with stock retainers) KENT |
ST |
$89.81 |
Valve Spring Retainers
| Part Number | Description |
Pkg'd | Price US $ |
99967-8..... |
Valve Spring Retainer For MGB - Steel, CRANE |
ST |
$50.86 |
Valve Spring Retainers - Steel. Standard Springs, KENT |
ST |
$69.95 |
|
MGB Valve Spring Retainers - Special To Fit ISKY |
ST |
$69.95 |
Hi-Lift & Roller Rockers
| Part Number | Description |
Pkg'd | Price US $ |
Roller Rockers 1.625 Ratio For MGB - In-line Oil Feed |
ST |
$560.63 |
|
Roller Rockers 1.625 Ratio For MGB - Off-Set Oil Feed |
ST |
$569.63 |
Pushrods
| Part Number | Description |
Pkg'd | Price US $ |
Push Rods For MGB, Tubular, Chrome Moly, 5/16" dia. (Long type, use with CF01 Lifters) ISKY |
ST |
$75.00 |
|
Push Rod For MGB, Standard, 1/4" dia. (Long type, use with CF01 Lifters) |
EA |
$7.78 |
|
| PR1622 | Push Rod MGA 1622, Std | EA |
$6.98 |
Offset: Cam Keys, Rocker Bushes
| Part Number | Description |
Pkg'd | Price US $ |
Rocker Bushing Set (requires sizing to shaft) |
ST |
$36.00 |
|
Off Set Cam Key - 2° (crank degrees) |
EA |
$9.50 |
|
Off Set Cam Key - 4° (crank degrees) |
EA |
$9.50 |
|
OSK68....... |
Off Set Cam Key - 6° (crank degrees) |
EA |
$9.50 |
OSK70....... |
Off Set Cam Key - 8° (crank degrees) |
EA |
$9.50 |
This page was last updated on: Saturday, June 01, 2002
